NCV20062DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 140μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 19mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Supply Voltage Limit-Max | 7V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV20062DR2G Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 8. It would be helpful if you could remember that this op amp ic should be powered by an 3.3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The input offset voltage is 500μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 140μA and 10 . On this instrumentation amplifier, there are 2 circuits that are connected together. On the output type, there are Rail-to-Rail different types of op amps. Automotive, AEC-Q100 corresponds to the op amp's series.
NCV20062DR2G Features
supply voltage of 3.3V
Output Type: Rail-to-Rail
NCV20062DR2G Applications
There are a lot of ON Semiconductor NCV20062DR2G Instrumentational OP Amps applications.
- ECG equipment
- Cinema or auditorium audio system
- Video amplifiers
- RF cable systems
- High gain DC amplifier
- Mobile phone
- MP3
- Active probe
- Professional videography
- Broadcasting
