NCV2901DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Packaging | Tape and Reel |
| Published | 2007 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-COLLECTOR |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Max Supply Current | 2mA |
| Current - Output | 16mA |
| Response Time | 1.3 μs |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Screening Level | AEC-Q100 |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCV2901DR2 Overview
For convenience, it is packaged in SOIC .The comparator has an output type of OPEN-COLLECTOR .This chip is designed with the Tape and Reel package.You can find 14 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator includes 14 pins.The comparator has 14 pins.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 2mA in order to use the device normally.If the current supply exceeds 2mA , the comparator could malfunction.A power supply of 5V is sufficient for the operation of the device.From the voltage formula, the voltage gain of the part is 100dB .Keeping the temperature below 105°C is not recommended.Temperatures below -40°C are not suitable for the device.Compatibility is defined as 36V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 3V is allowed for this comparator.To maintain the output quality, 4 channels work together.Comparators have a very high gain COMPARATOR amplifier.16mA is the output current of this device.
NCV2901DR2 Features
OPEN-COLLECTOR output capability
Voltage Gain: 100dB
COMPARATOR amplifier
NCV2901DR2 Applications
There are a lot of ON Semiconductor NCV2901DR2 linear comparators applications.
- Consumer Medical Electronics
- High-Speed Sampling Circuits
- Wireless Base Stations
- Automotive
- Portable and Battery-Powered Systems
- Handheld Instruments
- Battery management and protection
- Mobile Communications
- Self-diagnostics
- Multivibrators and High-Voltage Digital Logic Gates
