NCV2901DR2G
| Parameters | |
|---|---|
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV2901 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
NCV2901DR2G Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a CMOS, Open-Collector, TTL output type for this comparator.The part is shipped by Tape & Reel (TR) .The comparator has a total of 14 terminals.The chip belongs to Comparator .Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 4 elements in it.The device includes 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator is equipped with 14 pins.In order to find a solution that meets your specific needs, search NCV2901 for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.Electronic comparator is recommended that the nominal supply current of the device be 2mA .The compartator could be damaged if the current supply exceeds 2mA .The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.The voltage formula shows that the part has a voltage gain of 100dB .This part is from the Automotive, AEC-Q100 comparator series.
NCV2901DR2G Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
NCV2901DR2G Applications
There are a lot of ON Semiconductor NCV2901DR2G linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Ultra-Low Power Systems
- Mobile Phones
- RC Timers
- Appliances
- Point of load regulators
- Factory automation & control
- Automotive
