NCV2903DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV2903 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1500 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Propagation Delay (Max) | 1.3μs |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV2903DR2G Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a CMOS, DTL, ECL, MOS, Open-Collector, TTL output is used here.The chip is packaged with Tape & Reel (TR) .The device is designed with 8 terminations.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type General Purpose .There are a total of 2 elements in it.There are 8 pins on this board.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.This comparator has 8 pins.You may wish to search NCV2903 for more solutions that address your specific needs.There is a quiescent current of 2.5mA in this comparator.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .A current supply greater than 1mA may cause the comparator to malfunction.5V power supplies are enough to run the device.The maximal current your can input into the device is 250nA .The voltage gain of the part is indicated by 106.02dB in the voltage formula.The part belongs to the Automotive, AEC-Q100 series of comparator parts.
NCV2903DR2G Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
NCV2903DR2G Applications
There are a lot of ON Semiconductor NCV2903DR2G linear comparators applications.
- Portable Battery Monitoring
- Zero-Crossing Detectors
- Set Top Boxes
- Ultra-Low Power Systems
- DC/DC and AC/DC power supplies
- Simple Analog-to-Digital Converters (ADCs)
- Limit Comparators
- Motor drives
- General Purpose Low Voltage Applications
- Wearable Devices
