NCV300LSN30T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 3.0V |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | NCV300 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.94V |
| Max Reset Threshold Voltage | 3.06V |
| Threshold Voltage | +3.0V |
| Undervoltage Threshold | 2.94V |
| Overvoltage Threshold | 3.06V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV300LSN30T1G Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SOT-23-5 Thin, TSOT-23-5 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The supervisor is always powered by a 1.5V volt supply. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, it has 5 pins on IC management. The pins of the power management system count 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 500nA. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to NCV300, the base PMIC number. The maximum supply temperature is 1.3μA. As you can see, this IC power comes from the well-known Automotive, AEC-Q100 series of products.
NCV300LSN30T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCV300LSN30T1G Applications
There are a lot of ON Semiconductor NCV300LSN30T1G Voltage Supervisors applications.
- Electric heating appliances
- Electrical fire monitoring system
- emergency room
- Dash board
- Display equipment
- External alarm
- Rechargeable batteries
- Power distribution systems of CCU
- Consumer electronics
- Stable power system
