NCV301LSN45T1G
| Parameters | |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | NCV301 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.5V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.41V |
| Max Reset Threshold Voltage | 4.59V |
| Threshold Voltage | +4.5V |
| Undervoltage Threshold | 4.41V |
| Overvoltage Threshold | 4.59V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
NCV301LSN45T1G Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1.5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 500nA. To find similar IC managements from the manufacturer, you can always search by NCV301. At most, voltage supervisor can operate at a supply temperature of 1.4μA. The IC power comes from the well-known Automotive, AEC-Q100 series.
NCV301LSN45T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCV301LSN45T1G Applications
There are a lot of ON Semiconductor NCV301LSN45T1G Voltage Supervisors applications.
- Rechargeable batteries
- Medical-specific isolation transformer
- Electric heating appliances
- Urban rail transit weak current power monitoring
- Linux and server computing
- Power distribution systems of ICU
- Solar power charger
- Detection of phase loss
- Household appliances
- Detection of phase sequence
