NCV3020ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV3020 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Configuration | Positive |
| Output Current | 130mA |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Max Supply Current | 11mA |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 84 % |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV3020ADR2G Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) are supported. Voltages 4.7V~28V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 300kHz. Surface Mount makes it suitable for general dc dc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 12V. Searching "NCV3020" will return other relevant dc to dc converter ics. Switching converter has a total of 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. This dc dc voltage regulator should be powered by a voltage of 4.7V. Statistically, DC regulator outputs 600mV volts. You should note that the dc dc regulator's usual output current is 130mA. The duty cycle of the voltage regulator dc to dc can be set to 84 % on power-up or power-down to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator360kHz has the maximum frequency. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series. It runs on a 11mA supply current. In the presence of a current greater than 11mA, the component may fail to operate properly and may be damaged. Switching voltage regulators' nominal current supply is 11mA.
NCV3020ADR2G Features
Transistor Driver Outputs
Switching Frequency: 300kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
NCV3020ADR2G Applications
There are a lot of ON Semiconductor NCV3020ADR2G DC to DC converter applications.
- Emergency lighting monitoring equipment
- Automatic testing equipment
- Machining centers
- Gear/thread machining machines
- Alternators
- Large fire protection systems
- Fire elevators
- Terrestrial set-top boxes
- Computed tomography (CT)
- seismic instrument power circuits
