NCV3030BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV3030 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 17.4mA |
| Nominal Supply Current | 17.4mA |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2.4MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.9MHz |
| Max Duty Cycle | 80 % |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV3030BDR2G Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 4.7V~28V and has a 4.7V~28V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Using this switching controller, it is possible to switch at 2.4MHz. dc dc regulator can be generalized using Surface Mount. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. In addition to "NCV3030", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 8. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.7V. According to the test statistics, DC regulator outputs 3.3V voltage. In most cases, the dc dc regulator's output current is 3A. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 80 % during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulators have a maximum frequency of 2.9MHz. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. A supply current of 17.4mA is used to power it. The nominal current supply of this the controllers dc is 17.4mA.
NCV3030BDR2G Features
Transistor Driver Outputs
Switching Frequency: 2.4MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
NCV3030BDR2G Applications
There are a lot of ON Semiconductor NCV3030BDR2G DC to DC converter applications.
- Industrial controllers
- Access control systems
- Medical monitoring systems
- Emergency lighting monitoring equipment
- Pipe bending machines
- Ball screw pair
- Product testing
- Grinders
- Terrestrial set-top boxes
- Digital video recorders
