NCV303LSN10T1G
| Parameters | |
|---|---|
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 980mV |
| Max Reset Threshold Voltage | 1.02V |
| Threshold Voltage | +1 |
| Undervoltage Threshold | 980mV |
| Overvoltage Threshold | 1.02V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV303 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 450nA |
| Max Supply Current | 1.2μA |
| Adjustable Threshold | NO |
NCV303LSN10T1G Overview
There are 5 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes SOT-23-5 Thin, TSOT-23-5 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 1.5V. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. 5 pins are present in total in this power management. Pin count of the power management is 5. Supply voltage (Vsup) should be at least 800mV for this power management. There should be no more than 10V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The power management's supply current is 500nA. You can always use NCV303, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 1.2μA. As you can see, this IC power comes from the well-known Automotive, AEC-Q100 series of products.
NCV303LSN10T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCV303LSN10T1G Applications
There are a lot of ON Semiconductor NCV303LSN10T1G Voltage Supervisors applications.
- Radio
- DC stabilized power supply module
- Medical-specific isolation transformer
- Battery cars
- Microcontroller system
- Military electronics
- Transformer load monitoring equipment
- Network equipment
- Electronics installed in the vehicle
- Battery cars
