NCV303LSN29T1G
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV303 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.842V |
| Max Reset Threshold Voltage | 2.958V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.842V |
| Overvoltage Threshold | 2.958V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
NCV303LSN29T1G Overview
Power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 1.5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. This power management system has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. The supply voltage (Vsup) should not exceed 10V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supply current of the power management is 500nA. A similar IC managements number of the manufacturer can always be found by using NCV303, the base power ics number. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.
NCV303LSN29T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCV303LSN29T1G Applications
There are a lot of ON Semiconductor NCV303LSN29T1G Voltage Supervisors applications.
- Set top box
- Power distribution systems of CCU
- Important electronics for automotive protection
- Multi-voltage system
- Radio
- Military communications
- Power distribution systems of operating room
- Electrical fire monitoring system
- Electronics installed in the vehicle
- Unattended substation automation
