NCV33064DM-5R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 520mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33064 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 390μA |
| Power Dissipation | 520mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.6V |
| Undervoltage Threshold | 4.61V |
| Overvoltage Threshold | 4.7V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33064DM-5R2G Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 4V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 8 pins in it. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a 390μA supply current present in the power management. You can always use NCV33064, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 5V watts of power to operate this voltage supervisor.
NCV33064DM-5R2G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
390μA operating supply current
NCV33064DM-5R2G Applications
There are a lot of ON Semiconductor NCV33064DM-5R2G Voltage Supervisors applications.
- Sensitive sensors
- Power communication system
- Detection of phase loss
- Medical-specific isolation transformer
- Magnetic resonance imaging
- Power distribution systems of infant care room
- External alarm
- Computer applications
- Electric heating appliances
- Automotive permanent magnet synchronous motors
