NCV33064P-5RP
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Box (TB) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 625mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCV33064 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 390μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.5mA |
| Threshold Voltage | +4.6V |
| Undervoltage Threshold | 4.61V |
| Overvoltage Threshold | 4.7V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCV33064P-5RP Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Box (TB). For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 240. IC management conducts at a voltage of 4V. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Through Hole. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. Voltage (Vsup) shouldn't exceed 6.5V volts in this PMIC. The recommended mounting type for IC management is Through Hole. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 390μA volt supply current. It is always advisable to use NCV33064, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 5V watts is required for the operation of this power management. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.
NCV33064P-5RP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
390μA operating supply current
NCV33064P-5RP Applications
There are a lot of ON Semiconductor NCV33064P-5RP Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- FPGA design
- Military electronics
- Power communication system
- Urban rail transit weak current power monitoring
- Precision measurement
- Automotive permanent magnet synchronous motors
- Low voltage/high power - AI, GPU
- Smart meter
- Medical-specific insulation monitor
