NCV33072DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | NCV33072 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 1.9mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 97dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33072DR2G Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifiers. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. For this electrical component, Surface Mount is the recommended mounting type. Operational amplifier can operate supply current at 1.9mA. The voltage gain should stay at 100dB. During the manufacturing process, this buffer amplifier is divided into 2 circuits. To operate this buffer amplifier, the temperature must not be lower than -40°C. It is recommended that op amp be used at temperatures below 125°C. The operating supply voltage of the buffer op amp is rated at 22V. The instrumentation amplifier is packed in the form of TAPE AND REEL. Buffer op amp series numbers are indicated by the Automotive, AEC-Q100.
NCV33072DR2G Features
8 Pins
supply voltage of 15V
100dB voltage gain
NCV33072DR2G Applications
There are a lot of ON Semiconductor NCV33072DR2G Instrumentational OP Amps applications.
- Wireless base stations
- MP3
- Hand-held batteries
- Addition operation circuits
- PDA
- Digital cameras
- Video data acquisition
- Video computer boards
- Portable electronic products powered by batteries
- Professional videography
