NCV33074ADR2G
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.9mA |
| Supply Current-Max | 11.2mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Max Input Voltage | 44V |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
NCV33074ADR2G Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. In this case, there are 14 pins on the board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are available on the instrumentation amplifier. The input offset voltage is 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 1.9mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 100dB is the best course of action. During the manufacturing process, this buffer amplifier is divided into 4 circuits. It is used TAPE AND REEL to pack the op amps. This buffer amplifier is assigned within the Automotive, AEC-Q100 series by its manufacturer.
NCV33074ADR2G Features
14 Pins
supply voltage of 15V
100dB voltage gain
NCV33074ADR2G Applications
There are a lot of ON Semiconductor NCV33074ADR2G Instrumentational OP Amps applications.
- Medical imaging
- Television broadcasting equipment
- Signal filtering
- Scintillation detectors
- Video conversion and routing
- Blood pressure sensors
- Video amplifiers
- Integrator circuits
- Power generator
- RF cable systems
