NCV33152DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 560mW |
| Technology | BIPOLAR |
| Voltage - Supply | 6.1V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCV33152 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 560mW |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Rise Time | 36ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 36ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Screening Level | AEC-Q100 |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCV33152DR2 Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A package of Tape & Reel (TR) has been used.Configuration is based on 2 drivers.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is 6.1V~18V it is able to demonstrate its superiority.This gate type has a N-Channel MOSFET design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.It's configured with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number NCV33152.Surface Mount is the way it takes to mount the device.During design, it is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.1.5A is the maximum output current.There are various useful electronic components in its subcategory MOSFET Drivers.Components with 8 pins are available.This device has a maximum power dissipation of 560mW, indicating that it is capable of reducing power loss without overheating.
NCV33152DR2 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
NCV33152DR2 Applications
There are a lot of ON Semiconductor NCV33152DR2 gate drivers applications.
- Commercial air-conditioning (CAC)
- Isolated Supplies for controller area network (CAN),
- DC-DC Converters
- Active filtering
- Motor Drives
- Refrigerator
- Automotive Applications
- Commercial and agricultural vehicles (CAV)
- Isolated switch mode power supplies (SMPS)
- Line drivers
