NCV33161DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCV33161 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 560μA |
| Max Supply Current | 900μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 1.245V |
| Max Reset Threshold Voltage | 1.295V |
| Undervoltage Threshold | 1.245V |
| Overvoltage Threshold | 1.295V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33161DMR2G Overview
Power management is mounted through 8 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. The supervisor is always powered by a 5V volt supply. When 2 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The total number of pins on this power management is 8. Pin count of the power management is 8. It is recommended that Vsup should not be less than 2V for this IC power. Voltage (Vsup) shouldn't exceed 40V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a supply current of 560μA for the power management. A similar IC managements number of the manufacturer can always be found by using NCV33161, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 900μA. It is one of the well-known Automotive, AEC-Q100 series power ic line.
NCV33161DMR2G Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
560μA operating supply current
NCV33161DMR2G Applications
There are a lot of ON Semiconductor NCV33161DMR2G Voltage Supervisors applications.
- WiFi router
- Power distribution systems of operating room
- Cloud computing
- Automotive permanent magnet synchronous motors
- Low voltage/high power - AI, GPU
- Digitally controlled LDO regulators circuit
- Smartphones
- Automotive power systems
- Fire equipment power monitoring system
- FPGA design
