NCV33161DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin (Sn) |
| Additional Feature | MINIMUM SUPPLY NEEDED FOR NEGATIVE SENSING IS 4V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 450mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33161 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 900μA |
| Power Dissipation | 450mW |
| Max Supply Current | 900μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 1.245V |
| Max Reset Threshold Voltage | 1.295V |
| Undervoltage Threshold | 1.245V |
| Overvoltage Threshold | 1.295V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33161DR2G Overview
As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. Power management consists of 2 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 5V is used to conduct the PMIC chip. Power ics operate at 2 supply voltages. Surface Mount mounts IC management. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. Power managment ic pin count is 8. Supply voltage (Vsup) should be at least 2V for this power management. There should be no more than 40V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 900μA for the power management. There are other features such as MINIMUM SUPPLY NEEDED FOR NEGATIVE SENSING IS 4V to name a few. For similar manage ics search of the manufacturer, you can always refer to NCV33161, the base PMIC number. The power management must be powered by 5V volts to function properly. The maximum supply temperature voltage supervisor can handle is 900μA. Located in the well-known Automotive, AEC-Q100 series product line, this IC management is a kind of this series.
NCV33161DR2G Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
900μA operating supply current
NCV33161DR2G Applications
There are a lot of ON Semiconductor NCV33161DR2G Voltage Supervisors applications.
- Solar power charger
- Leakage current detection
- Power distribution systems of operating room
- Consumer electronics
- Power distribution systems of CCU
- Power distribution systems of ICU
- External alarm
- Utility meter
- Dash board
- emergency room
