NCV33164D-5R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33164 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 32μA |
| Power Dissipation | 700mW |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 4.15V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.33V |
| Undervoltage Threshold | 4.33V |
| Overvoltage Threshold | 4.45V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33164D-5R2G Overview
There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 2.4V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 32μA. A similar IC managements number of the manufacturer can always be found by using NCV33164, the base power ics number. To operate this power management, you will need at least 5V volts of power. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.
NCV33164D-5R2G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
32μA operating supply current
NCV33164D-5R2G Applications
There are a lot of ON Semiconductor NCV33164D-5R2G Voltage Supervisors applications.
- Transformer load monitoring equipment
- Insulation fault location system
- Battery-powered equipment
- Set top box
- Household appliances
- Battery cars
- Computer applications
- External alarm
- Power distribution systems of ICU
- Kitchen appliances
