NCV33202VDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33202 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Operating Supply Current | 1.125mA |
| Nominal Supply Current | 1.8mA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 14mV |
| Bandwidth | 2.2MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Voltage - Input Offset | 8mV |
| Max Frequency | 10Hz |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33202VDR2G Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. The input offset voltage is 14mV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C for optimal performance. Using an 1.125mA supply current, this operational amplifier ics can be operated. 109.54dB should remain the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 6V. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. This buffer amplifier is assigned within the Automotive, AEC-Q100 series by its manufacturer.
NCV33202VDR2G Features
8 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
NCV33202VDR2G Applications
There are a lot of ON Semiconductor NCV33202VDR2G Instrumentational OP Amps applications.
- Polarized electrodes
- Oscilloscopes
- Medical instruments
- PDA
- Home audio systems
- Power generator
- Video amplifiers
- Displayers for aircraft and air transportation control systems
- Wireless base stations
- Switching amplifier
