NCV33204DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33204 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Operating Supply Current | 1.125mA |
| Nominal Supply Current | 3.6mA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 17mV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Voltage - Input Offset | 10mV |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33204DR2G Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 14h termination of the year. The total number of pins on linear amplifier is 14. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 14 pins on this chip. The input offset voltage is 17mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . Operational amplifier can operate supply current at 1.125mA. 109.54dB should be the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. 4 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 6V voltage. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100 series.
NCV33204DR2G Features
14 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
NCV33204DR2G Applications
There are a lot of ON Semiconductor NCV33204DR2G Instrumentational OP Amps applications.
- Medical instruments
- Displayers for aircraft and air transportation control systems
- High input resistance broadband
- pH (acidity)
- Voltage regulation circuit
- Communication
- Medical imaging
- Band-pass filter
- Home audio systems
- Wireless base stations
