NCV33204DTBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33204 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Operating Supply Current | 1.125mA |
| Nominal Supply Current | 3.6mA |
| Output Current | 80mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±0.9V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 17mV |
| Bandwidth | 2.2MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 66.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13V |
| Voltage - Input Offset | 10mV |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33204DTBR2G Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 14. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 17mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -55°C~125°C. Operational amplifier can operate supply current at 1.125mA. There should be no change in the voltage gain at 109.54dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 6V. It is used TAPE AND REEL to pack the op amps. In this case, Automotive, AEC-Q100 represents the instrumentation amplifiers' series number.
NCV33204DTBR2G Features
14 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
NCV33204DTBR2G Applications
There are a lot of ON Semiconductor NCV33204DTBR2G Instrumentational OP Amps applications.
- E-book readers
- Communication device
- Multiplication circuits
- Professional videography
- Integrator circuits
- Comparator
- Multimedia playback equipment
- Image computer boards
- Wireless base stations
- Ultrasound transducers
