NCV33274ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33274 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-18/3/36V |
| Operating Supply Current | 2.15mA |
| Nominal Supply Current | 8.6mA |
| Output Current | 37mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.65μA |
| Nominal Gain Bandwidth Product | 24MHz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCV33274ADG Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the General Purpose type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 14 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 14 pins. There is an input offset voltage of 2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . This op amp can operate from a supply current at 2.15mA. It is recommended to keep the voltage gain at 100dB at all times. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The Automotive, AEC-Q100 stands for the buffer op amp's serial number.
NCV33274ADG Features
14 Pins
supply voltage of 15V
100dB voltage gain
NCV33274ADG Applications
There are a lot of ON Semiconductor NCV33274ADG Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Signal filtering
- Car stereo
- Multimedia playback equipment
- Radar
- Blood pressure sensors
- pH (acidity)
- Switching amplifier
- Video amplifiers
- Power transmission
