banner_page

NCV33274ADR2G

37mA per Channel 300nA 80 dB Instrumentational OP Amps 0.8μA 18V 3V~36V ±1.5V~18V NCV33274 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCV33274ADR2G
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 366
  • Description: 37mA per Channel 300nA 80 dB Instrumentational OP Amps 0.8μA 18V 3V~36V ±1.5V~18V NCV33274 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2008
Series Automotive, AEC-Q100
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Tin (Sn)
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number NCV33274
Pin Count 14
Operating Supply Voltage 18V
Number of Elements 4
Power Supplies +-1.5/+-18/3/36V
Operating Supply Current 2.15mA
Nominal Supply Current 8.6mA
Output Current 37mA
Slew Rate 10V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 300nA
Voltage - Supply, Single/Dual (±) 3V~36V ±1.5V~18V
Halogen Free Halogen Free
Output Current per Channel 37mA
Input Offset Voltage (Vos) 2mV
Bandwidth 24MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 5500 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.8μA
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 100μV
Bias Current-Max (IIB) @25C 0.65μA
Nominal Gain Bandwidth Product 24MHz
Height Seated (Max) 1.75mm
Length 8.65mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCV33274ADR2G Overview


The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 14 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 2.15mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 100dB. A voltage rating of 4 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 18V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier. The Automotive, AEC-Q100 represents the op amp's series number.

NCV33274ADR2G Features


14 Pins
supply voltage of 15V
100dB voltage gain

NCV33274ADR2G Applications


There are a lot of ON Semiconductor NCV33274ADR2G Instrumentational OP Amps applications.

  • pH (acidity)
  • Micro signal measurement
  • ECG equipment
  • Semiconductor detectors
  • Professional videography
  • Wireless base stations
  • Information processing
  • Radiation thermometry transducers
  • Medical instruments
  • Digital cameras

Write a review

Note: HTML is not translated!
    Bad           Good