NCV33274ADTBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33274 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-18/3/36V |
| Operating Supply Current | 2.15mA |
| Nominal Supply Current | 8.6mA |
| Output Current | 37mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 24MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Bias Current-Max (IIB) @25C | 0.65μA |
| Nominal Gain Bandwidth Product | 24MHz |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33274ADTBR2G Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. In this case, there are 14 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 14 pins. The input offset voltage is 2mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Operational amplifier can operate supply current at 2.15mA. There should be no change in the voltage gain at 100dB. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The Automotive, AEC-Q100 stands for the buffer op amp's serial number.
NCV33274ADTBR2G Features
14 Pins
supply voltage of 15V
100dB voltage gain
NCV33274ADTBR2G Applications
There are a lot of ON Semiconductor NCV33274ADTBR2G Instrumentational OP Amps applications.
- Television broadcasting equipment
- Addition operation circuits
- Navigation
- Switching amplifier
- Test equipment
- Band-pass filter
- Polarized electrodes
- Medical instruments
- PDA
- Voltage regulation circuit
