NCV380LMU15AATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 55m Ω |
| Height Seated (Max) | 0.55mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCV380LMU15AATBG Overview
It is package in Tape & Reel (TR) case.The 6-UDFN Exposed Pad package contains it.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is P-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It consists of 6 terminations in total.During operation, the 6 pins are used.The LED driver has 1 functions.1.5AV is the maximum output of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 2.1A.Supply voltages of 5V allow for high efficiency.The lighting driver is mounted in the way of Surface Mount.In total, it has 6 pins.There is an electrical component included in the Automotive, AEC-Q100 series.Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 2.5V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.
NCV380LMU15AATBG Features
Supplied from 5V
1 channels
NCV380LMU15AATBG Applications
There are a lot of ON Semiconductor NCV380LMU15AATBG Power Switches ICs applications.
- Portable GPS
- Various applications equipped with buttons
- Wearable Devices
- USB Power Distribution
- USB Protection
- Portable Music Players
- Low Voltage I/O System Power
- Solid-State Drives
- Wireless Headsets
- Hot Swaps
