NCV380LMUAJAATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | Adjustable |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), UVLO |
| Rds On (Typ) | 55m Ω |
| Height Seated (Max) | 0.55mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV380LMUAJAATBG Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 6-UDFN Exposed Pad contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.Features of the lighting driver are Slew Rate Controlled, Status Flag.It contains 6 terminations.During operation, the 6 pins are used.As far as the lighting driver is concerned, there are 1 functions.The maximum output of the LED driving board is AdjustableV.Maximum output current falls to 2.1A when operation criteria are met.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Surface Mount.It is equipped with a total of 6 pins.It belongs to the Automotive, AEC-Q100 series.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.5V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.
NCV380LMUAJAATBG Features
Supplied from 5V
1 channels
NCV380LMUAJAATBG Applications
There are a lot of ON Semiconductor NCV380LMUAJAATBG Power Switches ICs applications.
- PC Cards
- Hot-Swap Systems
- Portable GPS Device
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Notebook and Tablet Computers
- Portable Devices
- USB Power Distribution
- USB Protection
