NCV3843BVDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 250kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV3843 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 25V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV3843BVDR2G Overview
It comes in a 14-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). dc controls with 7.6V~30V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It can switch at 500kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 14 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "NCV3843". There are a total of 14 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. According to the test statistics, DC regulator outputs 5.1V voltage. The dc to dc regulator can only accept a maximum input voltage of 25V. If you start a project, note down the dc dc regulator's usual output current of 1A. Voltage regulator dc to dc is designed to operate at 96 % duty cycle during power-ups and power-downs to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 250kHz. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100.
NCV3843BVDR2G Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 250kHz
NCV3843BVDR2G Applications
There are a lot of ON Semiconductor NCV3843BVDR2G DC to DC converter applications.
- Elevator lighting
- Hydro power
- Special machining machine tools
- Serial communication converter
- Motor controller circuits
- Program control systems
- Emergency lighting monitoring equipment
- Wind power
- Packaging
- Post equipment
