NCV6323BMTAATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 5.7mA |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Height | 750μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV6323BMTAATBG Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. A voltage regulator consists of 8 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. There is a 8-WFDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. A total of 1 outputs are configured in this voltage regulator. ICs such as this voltage regulator are capable of generating Adjustable outputs through their output pins. Surface Mount-mounting is compatible with this switching regulator. -40°C~125°C TA should be the operating temperature when voltage regulator is operating. This voltage regulator 12v reaches a switching frequency of 3MHz. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.6V. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. Voltage can be produced at 5.5V volts by voltage regulator. There are 8 pins that are used for the operation of the voltage regulator 12v. Ideally this switch regulator should have an output voltage of about 600mV at the very least. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 2A A. An output voltage of 5.5V is provided by this regulator voltage. This voltage regulator belongs to the Automotive, AEC-Q100 family and is known as a switching DC-DC regulator. An input voltage of 5.5V is used to operate this harley voltage regulator. In this case, a dc to dc voltage regulator's minimum supply voltage of 2.5V volts is required to ensure reliable performance. This DC DC switching regulator operates from a supply current of 5.7mA.
NCV6323BMTAATBG Features
1 outputs
8 pins
Operating supply voltage of 5.5V
NCV6323BMTAATBG Applications
There are a lot of ON Semiconductor NCV6323BMTAATBG Voltage Regulators applications.
- Constant current circuits
- Alternators
- Adjustable voltage or current linear circuits
- Sink circuits
- Electric water heaters
- Magnetohydrodynamic power
- Smoke prevention equipment
- Arc suppression circuits
- Communication system
- Production lines
