NCV70501DW002R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 6V~29V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 29V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Output Current-Max | 0.3A |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 15mA |
| Voltage - Load | 6V~29V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV70501DW002R2G Overview
Drivers controllers is designed with Tape & Reel (TR) package.Drivers controllers comes in a 16-SOIC (0.154, 3.90mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.I believe it would be suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 6V~29V volts.In terms of operating temperature, it falls within the range -40°C~125°C TJ.A total of 16terminations are available in the part.Drivers controllers is possible to apply voltage at a rate of 6V~29Vto the load.Surface Mountis the recommended mounting method.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.16pins are used in its design.Drivers controllers is a part of the Motion Control Electronics series.A supply voltage of 29V is required for the operation of this driver.In this case, the output voltage is maintained at Automotive, AEC-Q100.
NCV70501DW002R2G Features
Applications : General Purpose
Load voltage across the chip 6V~29V
NCV70501DW002R2G Applications
There are a lot of ON Semiconductor NCV70501DW002R2G motor drivers applications.
- Monitoring the energy that the luminaire uses
- Automotive applications
- High brightness LED lighting
- Hospitality buildings
- Tail lights
- Large format LED backlighting
- Footwell lighting
- PWM generators
- Emergency lighting
- Tunnel lights
