NCV70521MN003G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~172°C TJ |
| Packaging | Tray |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCV70521 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 30V |
| Power Supplies | 56/30V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.2A |
| Voltage - Load | 6V~30V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV70521MN003G Overview
This package was designed with Trayin mind.32-VQFN Exposed Padcases are included with the part.Ideally, the part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.The device is capable of supplying a voltage of 4.75V~5.25V volts.The operating temperature ranges from -40°C~172°C TJto -40°C~172°C TJ.The part has 32terminations available.At a rate of [0], voltage can be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 12V.Its recommended mounting way is Surface Mount.Drivers controllers is recommended to keep the part output current at 1.2A.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.As a result of the NCV70521part number, it can be found.32pins are used in its design.Drivers controllers is a part of the Motion Control Electronics series.1outputs are available.
NCV70521MN003G Features
Applications : General Purpose
Load voltage across the chip 6V~30V
base on NCV70521 number
designed with 1 outputs
NCV70521MN003G Applications
There are a lot of ON Semiconductor NCV70521MN003G motor drivers applications.
- Large outdoor LED display
- Hazardous application
- Step-up or step-down driver topologies
- RGB and monochromatic LED drivers for signage and traffic signals
- Indicator circuit
- Camcorders
- Automotive exterior and interior lighting
- Landscape lighting
- Fog lamps
- High power LED street light
