NCV70522DQ004G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~172°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 36 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 30V |
| Power Supplies | 56/30V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.2A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 12mA |
| Voltage - Load | 6V~30V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV70522DQ004G Overview
Drivers controllers is designed wDrivers controllersh a package of [0].A 36-BSSOP (0.295, 7.50mm Width) Exposed Padcase is included with the part.Surface Mountshould be used for mounting the part.As a result, it is appropriate for the component connected to General Purpose.4.75V~5.25V volts can be supplied by the device.There is a temperature range of -40°C~172°C TJin which this device operates.The part supports 36terminations.A voltage of 6V~30Vcan be applied to the load.Drivers controllers is important to note that this amplifier should be operated at the 12Vsetting.There is a recommended mounting method of Surface Mount.The output current should be kept at 1.2A for the part.In this device, the analog IC STEPPER MOTOR CONTROLLERis employed.36 pins are provided for its design.Drivers controllers is part of the series [0].
NCV70522DQ004G Features
Applications : General Purpose
Load voltage across the chip 6V~30V
NCV70522DQ004G Applications
There are a lot of ON Semiconductor NCV70522DQ004G motor drivers applications.
- Charge pump circuits
- Horticultural applications
- CHMSL (center high-mount stop lamps)
- Automotive exterior and interior lighting
- drivers for outdoor application
- Building technology
- Street lights
- Dome
- Tunnel lights
- Arena lighting
