NCV7101SN1T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 364mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 1.13mA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Max Input Voltage | 10V |
| Voltage - Supply, Single/Dual (±) | 1.8V~10V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 72mA |
| Input Offset Voltage (Vos) | 600μV |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 1000 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 5V |
| Nominal Gain Bandwidth Product | 1MHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV7101SN1T1G Overview
In the package, you will find a SOT-23-5 Thin, TSOT-23-5-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 5. There are a total of 5 pins on this op amp. Please take in mind that op amp should be run at 2.5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 5 pins are available on the instrumentation amplifier. Op amp rates 600μV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . You can run this op amp ic on 1.13mA . There are 1 circuits on op amps. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100 series.
NCV7101SN1T1G Features
5 Pins
supply voltage of 2.5V
Output Type: Rail-to-Rail
NCV7101SN1T1G Applications
There are a lot of ON Semiconductor NCV7101SN1T1G Instrumentational OP Amps applications.
- Differentiator circuits
- Hand-held batteries
- Micro signal measurement
- Strain gauges
- Medical imaging
- Precision measurement
- Industrial control system
- High speed sample
- Addition operation circuits
- Band-pass filter
