NCV7240DPR2G
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Max Output Current | 600mA |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 3.3V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Current - Output | 600mA |
| Turn On Delay Time | 50 μs |
| Output Current per Channel | 600mA |
| Turn-Off Delay Time | 50 μs |
| Interface IC Type | INTERFACE CIRCUIT |
| Driver Number of Bits | 8 |
| Screening Level | AEC-Q100 |
| Max Junction Temperature (Tj) | 150°C |
| On-State Resistance | 1.5Ohm |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 3 hours ago) |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 24 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 1.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT ALSO OPERATES AT 5V |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
NCV7240DPR2G Overview
It's included in the SSOP package.A Tape & Reel (TR)-shaped package holds it.Total terminations are 24.Device DUAL is in the terminal position.In total, there are 24 pins on it.A supply voltage of 3.3V can result in high efficiency.24 pins are used to operate the system.In Peripheral Drivers, this gadget is self-contained.The position of the object is in the direction of Surface Mount.For stable operation, 150°C°C is the maximum operating temperature.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.Hot Swap is set by default to output 8.Hot Swap can handle a maximum supply voltage of 5VV.As low a supply voltage as possible, such as 3.3VV, is possible.Hot Swap is necessary to reduce the maximum output current to 600mA in order to meet the operation crHot Swaperia.The maximum current required for its operation is {0}.Through the use of this device, IT ALSO OPERATES AT 5V can also be produced.Hot Swap has 1.5Ohm resistance.
NCV7240DPR2G Features
The terminal position of 24
NCV7240DPR2G Applications
There are a lot of ON Semiconductor NCV7240DPR2G hot swap controllers applications.
- Short-circuit protection in real time
- Automotive circuits
- PC board hot swap insertion and removal
- Base station power distribution system
- Industrial computers and servers
- Hard drive
- Telecommunications
- Avionics systems
- Network router
- Power supply hotswap & inrush control
