NCV7424DB0R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Output Voltage | 1.4V |
| Operating Supply Voltage | 12V |
| Max Supply Voltage | 27V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 10μA |
| Max Supply Current | 28mA |
| Data Rate | 20 kbps |
| Halogen Free | Halogen Free |
| Differential Output | NO |
| Protocol | LINbus |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Receiver Number of Bits | 4 |
| Duplex | Half |
| Receiver Hysteresis | 100mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 6000 ns |
| Baud Rate | 20 kbaud |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV7424DB0R2G Overview
LED drivers with the enhanced 16-TSSOP (0.173, 4.40mm Width) package will be able to drive a variety of common LEDs with ease.The Tape & Reel (TR) package houses this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.A Surface Mount-type PCB or development board can be used to place this wide receiver.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.In most applications, this ic receiver is used in environments where -40°C~125°C is the operating temperature.Driver ICs with a supply voltage range of 12V can operate efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.A 16-pin driver IC with enhanced power dissipation control is featured here.As a rule of thumb, this receiver is typically specified with a resolution of 4 bits.There is a voltage input supply of 12V required for the operation of this integrated circuit.There are 1 transceivers in total implemented by this IC.The integrator circuit comes with embedded 4 drivers.With an input voltage of 10μA, this integrating circuit has the ability to drive LEDs with an output voltage of 10μA.As far as the transceiver's maximum supply voltage of this IC is concerned, it is rated at 27V.Input currents above 28mA could lead to mal-functions in this can transceiver.The minimum required supply voltage is 5V for this line driver ic.A power-saving technique is used in this integrating circuit, whintegrating circuith belongs to the Automotive, AEC-Q100 series.A voltage of 1.4V can be delivered by Wide receiver.
NCV7424DB0R2G Features
Tape & Reel (TR) package
16 pin count
16 pins
Automotive, AEC-Q100 series
NCV7424DB0R2G Applications
There are a lot of ON Semiconductor NCV7424DB0R2G Drivers/Receivers/Transceivers applications.
- Low power, low voltage systems
- Single to Multimode Fiber Conversion
- Data center
- Wireless modems
- Broadcast application
- Wireless projection application for conferences
- interconnection between computers
- Indoor ad hoc meeting
- Desktop radio
- Automation systems
