NCV7510DWR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | FLEXMOS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | NCV7510 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Power Supplies | 5V |
| Nominal Supply Current | 7mA |
| Max Supply Current | 7mA |
| Input Type | Non-Inverting |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Interface IC Type | PWM BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 50V |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
NCV7510DWR2G Overview
Its 20-SOIC (0.295, 7.50mm Width) package is adopted for higher flexibility.Tape & Reel (TR) is the form of the package.1 drivers are incorporated for its configuration.Surface Mount is mounted in the way.Using a 4.75V~5.25V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET has been used in its design.-40°C~125°C TJ is the allowed temperature range for this device.Non-Inverting is used as its input type.Its configuration is based on a total of 20 terminations.Numerous related parts are available for its base part number NCV7510.Mounting the device requires Surface Mount.In addition, it is specifically designed to operate with a supply voltage of 5V.Mosfet driver employs an interface chip called PWM BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has a total of 20 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 50V.To increase stability, keep the supply current at 7mA.Due to its power supplies of 5V, it solves the power supply problem for a wide range of applications.The gate driver is part of the FLEXMOS? series.
NCV7510DWR2G Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
High-side voltage - Max (Bootstrap) of 50V
Operating with the supply voltage of FLEXMOS?
NCV7510DWR2G Applications
There are a lot of ON Semiconductor NCV7510DWR2G gate drivers applications.
- Multicolor LED/laser displays
- High current laser/LED systems
- DC-DC Converters
- 3-Phase Motor Inverter Driver
- Solar power supplies
- Video amplifiers
- Pulse transformer drivers
- Motor Controls
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Line drivers
