NCV7512FTG
| Parameters | |
|---|---|
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | Automotive, AEC-Q100, FLEXMOS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | NCV7512 |
| Pin Count | 32 |
| Max Output Current | 5.25mA |
| Power Supplies | 5V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Rise Time | 1.4μs |
| Fall Time (Typ) | 1.4 μs |
| Turn-Off Delay Time | 1 μs |
| Rise / Fall Time (Typ) | 1.4μs 1.4μs Max |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Supply Voltage1-Nom | 5V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
NCV7512FTG Overview
The 32-LQFP package offers greater flexibility.A package of Tray has been used.This device is equipped with 4 drivers for its configuration.Its recommended mounting way is Surface Mount.By using 4.75V~5.25V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is used as the input type in this program.The configuration is based on 32 terminations.There are various related parts under its base part number NCV7512.Mosfet driver is mounted using Surface Mount.As a result, it is configured with 32 pins when it is designed.A voltage of 3.3V is required for its operation.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.5.25mA is the maximum output current.There are several useful electronic components within its subcategory MOSFET Drivers.The number of component pins is 32.Mosfet gate drivers is recommended to keep the supply current at 5mA to ensure greater stabilMosfet gate driversy.With its power supplies of 5V, it solves the problems of power supply for a variety of applications.This gate driver is included into Automotive, AEC-Q100, FLEXMOS? series.
NCV7512FTG Features
Embedded in the Tray package
4 drivers
Employing a gate type of N-Channel MOSFET
32 pins
Operating with the supply voltage of Automotive, AEC-Q100, FLEXMOS?
NCV7512FTG Applications
There are a lot of ON Semiconductor NCV7512FTG gate drivers applications.
- DC/DC converters
- PCMCIA applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Industrial Modules
- Telecom switch mode power supplies
- Power factor correction (PFC) circuits
- 3-Phase Motor Inverter Driver
- Motor controllers
- High power buffers
- UPS systems
