NCV7512FTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100, FLEXMOS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | NCV7512 |
| Pin Count | 32 |
| Max Output Current | 5.25mA |
| Power Supplies | 5V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Rise Time | 1.4μs |
| Fall Time (Typ) | 1.4 μs |
| Turn-Off Delay Time | 1 μs |
| Rise / Fall Time (Typ) | 1.4μs 1.4μs Max |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Supply Voltage1-Nom | 5V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
NCV7512FTR2G Overview
In order to increase flexibility, the package 32-LQFP is used.Gate drivers is package in Tape & Reel (TR) case.This configuration includes 4 drivers.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 4.75V~5.25V V, it is able to demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.There is a temperature range for this device of -40°C~150°C TJ.The input type for this program is Non-Inverting.The configuration starts with 32 terminations.There are numerous related parts listed under its base part number NCV7512.The device is mounted using Surface Mount.In the device, there are 32 pins.This device operates with 3.3V supply voltage.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.There is a maximum output current of 5.25mA.There are various useful electronic components in its subcategory MOSFET Drivers.On the board, there are 32 component pins.To ensure high stability, the supply current should be kept at 5mA.Due to its 5V power supply, it can solve power supply problems for an array of diverse applications.Gate drivers of this type are included in the Automotive, AEC-Q100, FLEXMOS? series.
NCV7512FTR2G Features
Embedded in the Tape & Reel (TR) package
4 drivers
Employing a gate type of N-Channel MOSFET
32 pins
Operating with the supply voltage of Automotive, AEC-Q100, FLEXMOS?
NCV7512FTR2G Applications
There are a lot of ON Semiconductor NCV7512FTR2G gate drivers applications.
- Solar power supplies
- Broadcast equipment
- High-speed communications
- Line drivers
- Isolated Supplies for Motor Control
- Head-up and Head mounted displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Telecom switch mode power supplies
- 3-Phase Motor Inverter Driver
- Motor Control
