NCV7703BD2R2G
| Parameters | |
|---|---|
| Number of Terminations | 14 |
| Resistance | 800mOhm |
| Terminal Finish | Tin (Sn) |
| Applications | DC Motors, General Purpose |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 5.5V TO 40V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | NCV7703B |
| Pin Count | 14 |
| Output Voltage | 40V |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Output Current | 1.8A |
| Max Supply Current | 4mA |
| Turn On Delay Time | 15 μs |
| Halogen Free | Halogen Free |
| Output Current per Channel | 500mA |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Turn-Off Delay Time | 6 μs |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Current Limiting, ESD, Over Temperature, Over Voltage, UVLO |
| Number of Drivers | 3 |
| Rds On (Typ) | 800m Ω LS, 800m Ω HS |
| Load Type | Inductive |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
NCV7703BD2R2G Overview
H bridge is packaged using Tape & Reel (TR).H bridge is provided in the 14-SOIC (0.154, 3.90mm Width) package for the sake of cost savings.The supply voltage of 3V~5.25V can improve reliabilbridge drivery.Surface Mount is mounted on H bridge circuit.Motor driver H bridge works normally at -40°C~150°C TJ's operating temperature.There are a variety of applications for H bridge motor driver, including DC Motors, General Purpose.The board is mounted using Surface Mount.14 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.In signal interfaces, 14 pins serve as pronged contacts.In addition to the NCV7703B H bridge ic number, more related H bridge ics can be located by using its base H bridge ic number.H bridge circuit operates with the supply voltage of 3.3V.IC type BRUSH DC MOTOR CONTROLLER is used as H bridge circuit's analog IC.At a specified ambient temperature, the maximum load current that the power supply can provide is 1A.As a result of the current flowing through the output and power supply pins, there is a current of 1.8A.14 pins are work together to help this bridge driver play its specific functions.This H bridge motor driver falls under the subcategory of Motion Control Electronics.It is calculated that the Hbridge releases 40V volts.There are integrated 3 drivers in the system.In addition, H-bridge is capable of providing ALSO OPERATES WITH THE RANGE OF 5.5V TO 40V SUPPLY.
NCV7703BD2R2G Features
Available in 14-SOIC (0.154, 3.90mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : NCV7703B
With ALSO OPERATES WITH THE RANGE OF 5.5V TO 40V SUPPLY Drivers
NCV7703BD2R2G Applications
There are a lot of ON Semiconductor NCV7703BD2R2G Full Bridge Drivers, Half-Bridge Drivers applications.
- High-Current DC-DC Point-of-Load Converters
- Industrial Fans
- Optical disc drives
- Industrial Automation
- Industrial Pumps
- Telecom Microprocessor
- Voltage Regulators for GPUs
- Voltage Regulators
- Voltage Regulators for DDR memory arrays
- VTR
