NCV7708DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | DC Motors, General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCV7708 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 4mA |
| Output Configuration | Half Bridge (6) |
| Output Current per Channel | 500mA |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Over Temperature, Over Voltage |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 2.65mm |
| Length | 17.925mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCV7708DW Overview
Drivers controllers includes a Tubepackage.Parts are packaged in 28-SOIC (0.295, 7.50mm Width)cases.Drivers controllers is recommended that the part be mounted by Surface Mount.This component is suitable for the component connected to DC Motors, General Purpose.In this case, the device can supply 3V~5.25V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.In this case, the motor type is Brushed DC.The part has 28terminations available.There is the option of applying the voltage to the load at the rate of 5.5V~40V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.There is Surface Mount recommended mounting method for this device.In this device, the analog IC STEPPER MOTOR CONTROLLERis employed.Based on the NCV7708part number, it is found.Drivers controllers is designed wDrivers controllersh 28 pins.For optimal operation, its maximum output current reaches [0].
NCV7708DW Features
Applications : DC Motors, General Purpose
Load voltage across the chip 5.5V~40V
base on NCV7708 number
NCV7708DW Applications
There are a lot of ON Semiconductor NCV7708DW motor drivers applications.
- Brake lights
- parking lights
- LCD displays
- Dash
- Emergency lighting
- Tail lights
- A cross between entertainment
- Dome
- Handheld devices
- Commercial office
