NCV7708DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | DC Motors, General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCV7708 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 4mA |
| Output Configuration | Half Bridge (6) |
| Output Current per Channel | 500mA |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Over Temperature, Over Voltage |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 2.65mm |
| Length | 17.925mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCV7708DWR2 Overview
The design contains a Tape & Reel (TR)package.The part is packged with 28-SOIC (0.295, 7.50mm Width) case.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to DC Motors, General Purpose.The device is capable of supplying a voltage of 3V~5.25V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.There is a motor type Brushed DCavailable.A total of 28terminations are available in the part.In this case, the voltage can be applied to the load at the rate of 5.5V~40V.In order to get the best performance from this amplifier, it should be run at 5V.There is Surface Mount recommended mounting method for this device.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.The part number NCV7708indicates that it is found.In this device, there are 28 pins.For compliance with the operation requirements, the maximum output current is [0].
NCV7708DWR2 Features
Applications : DC Motors, General Purpose
Load voltage across the chip 5.5V~40V
base on NCV7708 number
NCV7708DWR2 Applications
There are a lot of ON Semiconductor NCV7708DWR2 motor drivers applications.
- Landscape lighting
- Hospitality buildings
- Monitoring the energy that the luminaire uses
- Tunnel lights
- Smart lighting applications
- Home lighting systems
- Side marker lights
- Step-up or step-down driver topologies
- Turn signals
- Footwell lighting
