NCV7719DQR2G
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCV7719 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 8 |
| Interface | SPI |
| Output Configuration | Half Bridge (8) |
| Current - Output | 2A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 28V |
| Max Collector Current | 500mA |
| Voltage - Load | 5.5V~28V |
| Turn On Time | 13 µs |
| Supply Voltage1-Nom | 13.2V |
| Switching Frequency | 5MHz |
| Turn Off Time | 6 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Motor Type - AC, DC | Brushed DC |
| Height | 1.7mm |
| Length | 8.64mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 3.15V~5.25V |
| Terminal Position | DUAL |
NCV7719DQR2G Overview
The design contains a Cut Tape (CT)package.A 24-LSSOP (0.154, 3.90mm Width) Exposed Padcase is included with the part.Ideally, the part should be mounted by Surface Mount.For the component connected to [0], it is suitable.There is a possibility of providing 3.15V~5.25Vvolts through the device.This device operates at a temperature of -40°C~150°C TJ.The motor type can be classified as Brushed DC.The part supports 24terminations.At a rate of [0], voltage can be applied to the load.Drivers controllers is important to remember that this amplifier should be run at 5V.A Surface Mountmounting method is recommended for this product.Keep the part output current at 2A.Based on the NCV7719part number, it is found.The device has 24 pins.A total of 8outputs are available.In this case, Automotive, AEC-Q100is maintained as the output voltage.
NCV7719DQR2G Features
Applications : General Purpose
Load voltage across the chip 5.5V~28V
base on NCV7719 number
designed with 8 outputs
NCV7719DQR2G Applications
There are a lot of ON Semiconductor NCV7719DQR2G motor drivers applications.
- Display LED backlighting
- Large format LED backlighting
- drivers for outdoor application
- LED bias
- Automotive instrumentation
- Side marker lights
- Lighting for health and wellbeing
- High power LED street light
- parking lights
- AM radio
