NCV809LTRG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | 4.63v |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV809LTRG Overview
This power management consists of 3 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 3.3V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 3. This power management has 3 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 800nA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to NCV809, which is the base power ics number. As the name implies, this supervisor is a kind of the famous Automotive, AEC-Q100 series product line.
NCV809LTRG Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
NCV809LTRG Applications
There are a lot of ON Semiconductor NCV809LTRG Voltage Supervisors applications.
- Power communication system
- Medical-specific insulation monitor
- Set top box
- Precision measurement
- Refrigeration
- Kitchen appliances
- Dash board
- Consumer electronics
- Personal computers
- Power distribution systems of operating room
