NCV809STRG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | NCV809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV809STRG Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The supervisor is always powered by a 3.3V volt supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. There are 3 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 800nA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to NCV809, which is the base power ics number. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.
NCV809STRG Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
NCV809STRG Applications
There are a lot of ON Semiconductor NCV809STRG Voltage Supervisors applications.
- Battery cars
- Microcontroller system
- External alarm
- Functional modules
- Important electronics for automotive protection
- Electric heating appliances
- Sensitive sensors
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
- Solar power charger
