NCV8406ADTRKG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 210mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 2.31W |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.29mm |
| Base Part Number | NCV8406 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 2.31W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 127 ns |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Rise Time | 486ns |
| Fall Time (Typ) | 692 ns |
| Turn-Off Delay Time | 1.6 μs |
| Continuous Drain Current (ID) | 7A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 8.5A |
| Rds On (Typ) | 185m Ω |
| Drain to Source Resistance | 210mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.54mm |
| Width | 6.095mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV8406ADTRKG Overview
A Tape & Reel (TR) is used to package it.It is included with the TO-252-3, DPak (2 Leads + Tab), SC-63 package as well.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart.As you can see, it comes from the NCV8406 family.It consists of 2 terminations in total.For operation, 3 pins are used.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 7A.The LED driver has a total of 3 pins.210mOhm resistance is present in the lighting driver.This electrical component is included in the Automotive, AEC-Q100 series.This case has the output current set to 7A.A total of 1 elements can be found.
NCV8406ADTRKG Features
Resistance of 210mOhm
NCV8406ADTRKG Applications
There are a lot of ON Semiconductor NCV8406ADTRKG Power Switches ICs applications.
- Hot-Swap Systems
- Portable/Handheld Devices
- Various applications equipped with buttons
- Hot Swap
- Solid State Drivers
- Hot Swaps
- Set-top-box
- Storage (HDDs, SSDs)
- Portable GPS Device
- Handheld Devices
