NCV8406ASTT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 210mOhm |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Base Part Number | NCV8406 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 1.31W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Continuous Drain Current (ID) | 7A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Output Peak Current Limit-Nom | 8.5A |
| Rds On (Typ) | 185m Ω |
| Drain to Source Resistance | 210mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV8406ASTT3G Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the TO-261-4, TO-261AA package, it is included.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Auto Restart features are available on the lighting driver.It belongs to the family NCV8406.It contains 4 terminations.For operation, we use the 4 pins.The LED driving board has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 7A.It is equipped with a total of 4 pins.In this case, there is 210mOhm resistance in the LED driving board.It belongs to the Automotive, AEC-Q100 series.
NCV8406ASTT3G Features
Resistance of 210mOhm
NCV8406ASTT3G Applications
There are a lot of ON Semiconductor NCV8406ASTT3G Power Switches ICs applications.
- USB Power Distribution
- Notebook and Tablet Computers
- Hot Swap
- Solid-State Drives
- Portable GPS
- Hot Swap
- Low Voltage I/O System Power
- PDAs
- Hot-Swap Systems
- PC Cards
