NCV8450STT3G
| Parameters | |
|---|---|
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 2.3mm |
| Base Part Number | NCV8450 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 800mA |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Element Configuration | Single |
| Output Configuration | High Side |
| Power Dissipation | 1.7W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 800mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~45V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 45V |
| Output Peak Current Limit-Nom | 0.8A |
| Rds On (Typ) | 1 Ω |
| Drain to Source Resistance | 1Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 1.651mm |
| Length | 6.6802mm |
| Width | 3.7084mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | Tin (Sn) |
NCV8450STT3G Overview
It is package in Tape & Reel (TR) case.Package TO-261-4, TO-261AA contains it.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Auto Restart features available on the LED driving board.The NCV8450 family contains this object.It contains 4 terminations.During operation, the 4 pins are used.There are 1 functions of the LED driver.Its maximum output voltage is 500mAV.It is necessary to reduce the maximum output current to 800mA to meet the operation criteria.With a supply voltage of 6V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.4 pins are equipped with it.It has 1Ohm resistance.These electrical components are part of the Automotive, AEC-Q101 series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.
NCV8450STT3G Features
Supplied from 6V
Resistance of 1Ohm
NCV8450STT3G Applications
There are a lot of ON Semiconductor NCV8450STT3G Power Switches ICs applications.
- Wireless Modem Data Cards
- USB Power Distribution
- USB Ports/Hubs
- Solid State Drivers
- Set-top-box
- USB Power Distribution
- HDD, SSD
- Portable Music Players
- PDAs
- Hard Disk Drives
