NCV8452STT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| Subcategory | Peripheral Drivers |
| Technology | NMOS |
| Voltage - Supply | 5V~34V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 13.5V |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Power Supplies | 13.5V |
| Output Configuration | High Side |
| Current - Output | 1A |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Voltage - Load | 5V~34V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 1 |
| Screening Level | AEC-Q101 |
| Turn On Time | 120 µs |
| Output Peak Current Limit-Nom | 3A |
| Turn Off Time | 120 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV8452STT3G Overview
Drivers controllers is designed with Tape & Reel (TR) package.There is TO-261-4, TO-261AA case included with the part.To mount the part by [0], it is recommended that you do so.I believe it is suitable for the component connected to General Purpose.There is a possibility of providing 5V~34Vvolts through the device.Operation temperature ranges from -40°C~150°C TJ.In this case, the motor type is Brushed DC.There are 4 terminations available in the part.The voltage can applied to the load at the rate of 5V~34V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 13.5V.Maintain a current of 1Afor the part output.There are 4 pins on it.Drivers controllers is part of the series [0].Drivers controllers is maintained at a voltage of Automotive, AEC-Q100.
NCV8452STT3G Features
Applications : General Purpose
Load voltage across the chip 5V~34V
NCV8452STT3G Applications
There are a lot of ON Semiconductor NCV8452STT3G motor drivers applications.
- Automotive instrumentation
- Industrial high-bay lights
- Industrial lighting
- High brightness LED lighting
- LCD displays
- parking lights
- Telltale lights
- Camcorders
- Architectural lighting
- Matrix LED dimmers
