NCV885300D1R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV8853 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 44V |
| Input Voltage-Nom | 13.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.1V~44V |
| Control Features | Enable, Power Good |
| Input Voltage (Min) | 3.4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 340kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 374kHz |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 93% |
| Clock Sync | Yes |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV885300D1R2G Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 3.1V~44V voltage are supplied and operated. Workable in an dc switcher where -40°C~150°C TJ is the -40°C~150°C TJrm. There is a switch at 340kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. Various 8 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 13.2V. Search for "NCV8853" to find other relevant dc to dc converter ics. 8 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. An input voltage of 3.4V is the minimum required for the dc dc voltage regulator. The dc to dc regulator can only accept a maximum input voltage of 36V. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. The max frequency of the pmic can reach 374kHz. Users should apply 44V to operate the voltage regulator dc to dc safely and reliably. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series.
NCV885300D1R2G Features
Transistor Driver Outputs
Switching Frequency: 340kHz
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
NCV885300D1R2G Applications
There are a lot of ON Semiconductor NCV885300D1R2G DC to DC converter applications.
- Domestic water pumps
- Photovoltaic power
- Magnetohydrodynamic power
- Elevator lighting
- Digital display device
- Precision electronic equipment
- Direct power supply system
- Refrigerators of central air conditioners
- Lathes
- Smoke exhaust equipment
