NCV887100D1R2G

8 Terminals 3.2V~40V 8-Pin NCV887100 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 170kHz Transistor Driver

Manufacturer: ON Semiconductor
Nocochips NO: 598-NCV887100D1R2G
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 493
Description: 8 Terminals 3.2V~40V 8-Pin NCV887100 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 170kHz Transistor Driver (Kg)

Details

Tags

Parameters
Input Voltage-Nom	13.2V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	800mA
Voltage - Supply (Vcc/Vdd)	3.2V~40V
Control Features	Current Limit, Enable
Max Output Voltage	2.5V
Topology	Boost, Flyback
Min Input Voltage	3.2V
Control Mode	CURRENT-MODE
Frequency - Switching	170kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	300mV
Max Frequency	187kHz
Max Duty Cycle	88 %
Clock Sync	Yes
Height	1.5mm
Length	5mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Base Part Number	NCV887100
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Type	Transistor Driver
Max Output Current	100μA
Operating Supply Voltage	40V

NCV887100D1R2G Overview

It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. A 3.2V~40V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~150°C TJ dc switcher before. It can switch at 170kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 13.2V. NCV887100 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. You should note down the dc dc regulator's usual output current of 800mA when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 88 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator has a maximum frequency of 187kHz. It is suggested that users apply 40V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The maximum input voltage of this dc switcher is 40V, so users must limit the voltage accordingly. There must be a 3.2V supply voltage. The dc switcher will not provide an output current greater than 100μA. Datasheets indicate that the switching converter can output 2.5V volts at its maximum. At least 300mV voltage is output by the voltage controller.