NCV887102D1R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV887102 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Output Current | 100μA |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 13.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 3.2V~40V |
| Control Features | Current Limit, Enable |
| Max Output Voltage | 2.5V |
| Topology | Boost, Flyback |
| Min Input Voltage | 3.2V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 300mV |
| Max Frequency | 1.1MHz |
| Duty Cycle (Max) | 91% |
| Clock Sync | Yes |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV887102D1R2G Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 3.2V~40V voltage are supplied and operated. Worked in a -40°C~150°C TJ dc switcher before. It can switch at 1MHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 8. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 13.2V is input. You can find other relevant dc to dc converter ics by searching "NCV887102". There are a total of 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. You should note that the dc dc regulator's usual output current is 800mA. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 1.1MHz on this dc regulators. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably. The dc switcher's maximum input voltage is 40V, so users must limit the voltage accordingly. A voltage of 3.2V is required for the supply. There will be 100μA current output from the dc switcher above 100μA. Datasheets indicate that the switching converter can output 2.5V volts at its maximum. A voltage controller's lowest output voltage cannot be less than 300mV.
NCV887102D1R2G Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit, Enable
PULSE WIDTH MODULATION
NCV887102D1R2G Applications
There are a lot of ON Semiconductor NCV887102D1R2G DC to DC converter applications.
- Automation technology
- PSRR circuits
- Pipe bending machines
- Cutting machine tools
- Printing
- Energy management systems
- Automatic testing equipment
- Low output voltage switching power supply circuits
- Communication system
- Power supplies of electronic gadgets
